ARCTIC
Arctic P8 8cm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack
£20.06
Out of stock
Arctic P8 8cm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack
ARCTIC
Arctic P8 8cm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack
£20.06
Out of stock
Product Details

 

80 mm PWM Fan with Cable Splitter - 5 Pack

  • Optimised for static pressure
  • Ideal choice on heatsinks, radiators and covered case vents
  • Newly developed, very quiet motor
  • Wide RPM range
  • Extended life span
  • High Quality Bearing
  • PWM Sharing Technology (PST) regulates fan speed synchronously
  • Push or pull-configuration
 
 
 
 
 
Optimised for Static Pressure

During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.
 
 
 

 
More Efficient Technology

The motor is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to operate much more efficiently than its predecessors. This saves energy without compromising performance.
 
 

 
 
Maximum Quietness, Minimum Vibration

Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
 
 
 

 
Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
 
 

 
 
200 to 3000 RPM Regulated via PWM PST

Thanks to the 4-Pin Connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
 
 
 

 
High-Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
 
 
 

 
Two Way Installation
  • Push warm air out of the case
  • Pull cool air into your case
 
Product Specification

Description

Specification

  • Type: 8cm Case Fan
  • Fan Connector(s): 4-pin
  • Fan Controller: PWM
  • Installation: Screws
  • #Hide#LED Lighting: No
  • Colour: Black
  • LED Lighting: -
  • Weight: 81 g
  • Fan Dimensions: 80 x 80 x 25 mm
    Cable Length: 400 mm
  • Rotation Speed: 200 - 3000 RPM
  • Fan Bearing: Fluid Dynamic Bearing
  • Air Flow: 23.4 cfm
  • Noise level: 0.3 Sone
  • Power: Current/Voltage: 0.09 A/12 V
    Starting Voltage: 3.4 V
  • Additional Features: See Overview
  • Package Type: Retail
  • Package Weight: 0.4690 kg
  • Warranty: 6 Years
  • #Hide#Multipack: Yes (Multipack)
Close
Example
Example
Close
*** STOCK LEVELS AND PRICES ARE FOR WEB ORDERS ONLY - PLEASE CALL 0191 3757520 FOR INSTORE STOCK ***
We use cookies to provide and improve your shopping experience. By accepting you agree to our cookie policy
Accept